Dialer Installation & User’s Guide 5
the update complete. If necessary, you can interrupt the
update by pressing any one of the tone buttons on your
phone for at least two seconds, and then hanging up for a few
seconds. You may then place your call. The dialer will get its
download later.
Please note that you should contact your service provider if you
move, change your phone number, or for any other reason want
to use your dialer with a new phone number. Failure to do so
can result in improper routing of your calls.
Please read on, in case you need to tune the dialer's operation
and so you can understand more about how the dialer works.
3. If necessary, tailor the dialer to a
special situation
Special situations include offices where you need to dial an 8
before dialing a phone number and use of the dialer with fax
machines. If you have a special situation, please go to the
Special situations section on page 7. Otherwise continue
below with Use the dialer.
4. Use the dialer
The dialer has a routing table loaded by the service provider.
This routing table tells the dialer which calls to route based
on information that includes your own phone number.
Typically the dialer will route domestic and international toll
calls.
When you place a call that should be routed, the dialer listens
to the digits you have dialed and stores them. When the dialer
is storing those dialed digits, they sound very soft because the
dialer is preventing them from being heard by your local
telephone office. When you have finished dialing, the dialer
will route the call by adding appropriate digits, if any, to the
To Next Page
Loading...
