Zoom player 3000 - Temporarily Turning the Sound off (Mute Function)

● 10
ADVANCED GUITAR EFFECTS PROCESSOR
The mute function temporarily turns the output OFF.
If you have stepped for more than a second on the Foot Switch whose
LED is lit, both effect sound and direct sound will be silenced (muted).
The LED for the currently selected patch will flash, and the module LED
will light. Also, the display will indicate the Mute status with
"", and
then change to " ".
The 3000 will return to the usual Play mode.
The FUNCTION switch can also be used to activate the Mute
function. For details, please refer to page 19.
When the FUNCTION switch mode is set to bypass or mute, step 1
is invalid. When not wishing to use the Foot Switches 1 - 4 for
on/off switching of the bypass or mute condition, set the
FUNCTION switch mode to BYPASS or MUTE.
NOTE
HINTHINT
BANK
FUNCTION
VALUE
ADVANCED GUITAR EFFECTS PROCESSOR
1.COMP
2.BOOSTER
3.OVERDRIVE
4.TALKING BOX
Sens/Gain
(Talking Gain)
Attack/Tone
(Talking Mode)
Level
(MIC Level)
VOLUME RTM
PRE DRIVE RTM
Gain/Top
Tone/Body
Level
ZNR
POSITION
MAIN DRIVE RTM
High/Depth
Midf/Rate/Sens
MidG/Reso
Low/Stage/Inv
Level
EQ RTM
Pitch/Key
Tone/Scale/Time
Shift/Mode/Dly
Bal/Mix
Amp Sim Mode
EFFECT1 RTM
Pitch/Key/Depth
Fine/Scale/Rate
Shift/Mode
Bal/Mix/Peak
SERI/PARA
EFFECT2 RTM
Time(x100mS)
Time(x1mS)
Feedback
Mix
SEAMLESS
DELAY RTM
Time
Tone/FB
Mix
Patch Level
FUNCTION Mode
REVERB RTM
1.OD
3.DIST
5.GRU
7.
METAL
1.3-BAND EQ
2.PHASE
3.PEDAL-WAH
4.AUTO-WAH
1.PITCH
3.DETUNE
4.PEDAL-PITCH
5.STRING
2.HPS 1.HALL1
3.ROOM 1
4.ROOM 2
5.PP-DELAY
2.HALL21.PITCH
3.CHO
5.TREM/PAN
6.RING MOD
1.NORMAL
2.ANALOG
3.HOLD
2.HPS
4.FLG
2.B-OD
4.FUZZ
6.LEAD
8.ACO
PRE DRIVE MAIN DRIVE EQ EFFECT 1 EFFECT 2 DELAY REVERB
TALKING BOX
POSITION SERI/PARA SEAMLESS
FUNCTION MODE BANK
(
VALUE
)
EDIT
(
CANCEL
)
GROUP STORE
1.MANUAL
2.BANK DOWN
3.DELAY(
TAP&HOLD)
4.BYPASS
5.MUTE
6.RTM
7.VOLUME
PRESETUSER
(BOTH) SEAMLESS
U
P
U O
1, 2
Keep your foot more than
one second
Temporarily Turning the Sound Off (Mute Function)
STEP
1
Step on the Foot Switch whose LED is currently lit, keep your foot pressed on the
switch for a moment, and then release it.
STEP
2
To release this status, step on the Foot Switch again, or select another patch.
Let's Try Out Some Patches (Play
Mode Operation)