This section explains all the Zoom Player 3000's effect types and parameters. However, parameters that
are the same for other effect types are only explained in brief.
• Parameters marked with "G" are global parameters, and parameters marked with "P" are
patch parameters. These parameters can be changed regardless of the on/off condition
of the respective effect module.
• Parameters marked with "←RTM" are parameters which can be operated by RTM when
that effect module is selected.
Depending on the type selected for the effect module, some parameters have no setting item ( shaded section in the
illustration). For information on the display of such parameters, please refer to page 14.
This module comprises distortion effects such as compressor and overdrive. The talking box effect for
use with a microphone and the VOLUME RTM setting are also part of this module.
■ Parameter 1 TYPE (Effect Type)
The following four effect types can be selected for
the PRE DRIVE effect module.
Type 1 COMP (Compressor)
Type 2 BOOSTER
Type 3 OVERDRIVE
Type 4 TALKING BOX
Depending on the selected effect type, the content of
parameters 2, 3, 5, 7 changes.
■ Type 1 COMP (Compressor)
This effect keeps the level constant, resulting in a
steady and stable sound.
●Parameter 2 Sens (←RTM)
Determines the depth of the compression effect.
●Parameter 3 Attack
Determines the time interval between guitar attack
sound and the start of compression.
■ Type 2 BOOSTER
Booster effect with emphasis on mid and upper
range.
●Parameter 2 Gain (←RTM)
Determines the distortion intensity.
●Parameter 3 Tone
Adjusts the high-frequency range sound.
■ Type 3 OVERDRIVE
Overdrive effect giving the kind of distortion
produced by a tube amplifier. The parameters are the
same as for BOOSTER of type 2.
To Next Page
Loading...
