Zoom R16 - Recording the First Track; Project Setup and Input Level Adjustment; Recording, Stopping, and Playback Process; Recording Tips and Important Notes

11
Audio interface manual
Setting up function keys
Thevekeysabovethetransportkeyscanbeusedasfunctionkeys(F1~F5)andassigned
as you desire.
Function key setup method
1
Open the Device Setup Dialog
Box in Cubase LE.
2
Commands can be assigned in the three
columns displayed on the right side of the
window.
Select Mackie Control
3
From the (Button) column
choose the function key [F1~F5]
to be assigned a Cubase LE
function.
5
7
Press the “Apply” button.
Choose the type of Cubase LE
function from the Category pop-
up menu.
6
Click on the “Command” column
and select the desired specic
Cubase LE function from the
pop-up menu.
(The contents of this pop-up menu will
be different depending on the category
chosen.)
4
Click on the “Category” column
for that key.
HINT
The display of MENU etc. may be different
depending on the version of Cubase LE.
Please refer to your Cubase LE manual.