Zoom R16 - Playback of a Project; Project Playback Overview and A-B Repeat Setup; Executing and Cancelling A-B Repeat Playback

15
Audio interface manual
Tuner
The R16’s tuner can be used in the same way as in recorder mode. For further details
please consult the OPERATION MANUAL.
1
Press [TOOL].
Select
>TUNER
2
TOOL
>TUNER
Change
menu
Push [Enter].
CHROMATIC TUNER
TOOL>TUNER>CHROMATIC
4
CHROMATIC 440Hz
Select the base pitch
and tune the instrument.
CHROMATIC 440Hz
>>A
Displays the note closest to the input
signal.
Displays whether the pitch is higher or
lower than the displayed note.
Change the base pitch
3
Select tuner type.
Change
tuner type
Change
tuner type
GUITAR 440Hz
<E> String6
Chord / Note
Tuner Type
CHROMATIC 440Hz
Base Pitch
NOTE
Tuner settings are saved when you terminate audio
interface mode and can be used again the next
time by choosing [CONTINUE] when you relaunch
audio interface mode.
HINT
· The default base pitch is 440 Hz.
· Tuners other than the chromatic tuner can be used.
(
Reference : OPERATION MANUAL P.31 )