Zoom R16 - Connections; Connecting Audio Equipment and Instruments; SD Card and USB Connectivity

6
Audio interface manual
· The audio interface and control surface functions
of the R16 can be used by drawing power
through the USB bus. Power from batteries or
the adapter is not necessary.
· We recommend always using the latest R16
system software. Operating the R16 with an older
system could result in it not being recognized by
your computer.
1
Press [USB].
AUDIO INTERFACE
Terminate?
Press [Enter].
Terminate the connection.
2
Remove the USB cable.
3
The [DEVICE] USB indicator will light.
Sample Rate=44.1kHz
s:Solo
Connect the USB cable to the R16.
5
Connect the USB cable
to the computer.
6
AUDIO INTERFACE icon blinks
When connection is complete the AUDIO
INTERFACE icon appears.
Connection setting
complete
NOTE
Disconnecting
Data transferred with CONTINUE
· INSERT EFFECT settings
· SEND RETURN EFFECT settings
· Track parameter settings
· TUNER settings
RESET
Restores default settings for each item