Zoweetek ZW-H6 - User Manual

To Next Page

ZOWEETEK ORIGINAL SOUND

Voice Amplifier

USER MANUAL

ZW-H6

Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn

A. When working, the battery icon on the screen flash continuously,

indicating that the battery is low,please charge it in time. Please use

About Speaker Charging:

MIC VOL

MIC

DC 5V

USB

Detachable

head-mounted rack

UHF Wireless Microphone:

soft rubber circle

head-mounted design

Head bracket

Pairing key

battery

charging sign

volume -

volume +

Power switch

ON/OFF

Microphone head

DC 5V

Step 1: Turn on the speaker, fast and short press “ M ” 3 times

to enter into UHF wireless pairing status with voice prompt

“ UHF is waiting for connection ”.

Step 2: Switch on the UHF wireless MIC and long press “ ” for 5s,

pairing is successful with voice prompt “UHF is connected”.

Then you can amplify voice with wireless MIC.

Note: During the use of wireless microphone,short press “+” to

increase the microphone volume and short press “ - ” to

reduce the microphone volume.Long press “ ” to disconnect

wireless microphone with voice prompt “ UHF is disconnected ”,

repeat step 1 and step 2 to pair wireless microphone manually.

UHF Wireless Microphone Operation:

When the blue light blinks, it means the battery in the headset is low,

Please push the switch to “ OFF ” state to close the microphone,

connect one end of Micro USB connector to the DC 5V interface of

the microphone, and connect the other end to the charger to the

power socket. When charging, the red light will on all the time; it

will go out when the battery is fully charged. Unplug the charger as

soon as it is charged.

100% Zoweetek Guaranteed Product Satisfaction.

We provide operation guidance and render a 1 year warranty.

If you have any questions, please feel free to contact us.

We will try our best to provide you the best service.

Official website: www.zoweetek.cn

Email:support@zoweetek.cn

About UHF Wireless Microphone Charging:

the standard adapter.Please unplug the adapter timely after

fully charged the charging time is normally 4-5 hours.When

charging, the screen battery icon will flash continuously. When

fully charged, the battery icon will stop flashing and remain in

the long light state.

B. In order to achieve the best effect when using the speaker for

the first time, it is recommended to be fully charged before use.

C. Please use the standard 5V 2A charger to charge the device.

Wireless Microphone Technical Parameters:

Frequency response:

Working time:

Sensitivity:

30Hz-23KHz

-41dB±1dB

（0dB=1V/Pa）

3-5hours

Output resistance:

Recharging voltage:

Charging time:

≤2.2KΩ

DC 5V 500mA+

2-3 hours

Caution And Trouble Shooting:

Solve some normal problems by yourself:

1). Aim at the MIC capsule when speaking and keep the distance

between voice amplifier and MIC longer than 60cm avoid howling.

2). No sound out from the speaker after the UHF Mic is paired. The

connection between Mic and speaker may be lost. You should

re-pair it as mentioned in the previous paragraph.

3). Don’t insert or plug the connector frequently to avoid the looseness

of socket or the bad connect.

4). Recharge timely when battery power is low.

5). Original accessories are suggested if they need to be replaced.

6). Non-professional technician is not allowed to dismantle or repair

the product, please contact the local agent if there is any question

or service requirement.

7).The amplifier should be kept in dry and ventilated area, rain,water,

thump should be avoided.

8).Please keep the product and accessories far away from children.

9).This product needs to user the power adapter (DC 5V, 2A) to

charge. After charged, please remember to unplug the power cord

or power socket. We suggest stop other operations under the

charging mode. Please cut off the power supply first if you need

to use it.

10).If you don’t need to use it, please switch off the speaker to avoid

the loss of power.

Zoweetek Guarantee:

3.Haven’t turned on the

volume

Please adjust the volume

properly.

Please turn down the

volume.

Please use another better

audio files.

Please recharge it to

switch on.

2.The speaker is broken

Please contact us for

maintenance.

4.The UHF wireless is

disconnected or wireless

MIC is low battery

3.Haven’t turned on the

MIC volume

2.Haven’t switched on the

MIC

1.Haven’t inserted the wired

MIC properly

Please pair the UHF wireless

microphone again.Please

recharge wireless MIC.

Please turn on the MIC

volume.

Please turn on the

MIC properly.

Please insert the MIC.

3.Haven’t inserted the USB

flash drive/TF card properly

2.Chaotic procedure with

wrong

1.The audio’s format in USB

flash drive or TF card is wrong

Please insert the USB/TF

card properly.

Please restart the speaker.

Please turn the format to

MP3.

Please check whether the

distance beyond the effective

range of 33 ft.

Clear any barriers between

your device and speaker.

May exceed the distance

range or too many obstacles

Switch on the

speaker but no

sound

With sound

distortion

No sound with

Karaoke

No sound with

MP3 playing

The music is

staccato when

playing

1. Main machine is running

out of battery

2.No audio input

1.The volume is too high

Need help?

Do you have a question about the Zoweetek ZW-H6 and is the answer not in the manual?

This document describes the ZOWEETEK ZW-H6 UHF Wireless Portable PA System Loud Speaker with Headset, also known as a Voice Amplifier. It is a highly integrated system designed to amplify voice with HD sound quality and function as a music player and portable Bluetooth speaker.

Function Description

The ZW-H6 serves multiple functions:

Voice Amplification: It amplifies your voice with HD sound quality. Users can connect either a wired microphone or a wireless headset microphone.
Music Player: It supports music playback from a TF card, USB flash disk, and 3.5mm AUX audio input.
Bluetooth Speaker: It functions as a portable Bluetooth speaker, supporting Bluetooth 5.0 for sync music play and wireless karaoke with a connection distance of up to 33 ft. It also supports TWS (True Wireless Stereo) wireless Bluetooth connection, allowing two ZW-H6 speakers to play simultaneously.
FM Radio: The device includes an FM radio function with automatic channel searching and saving.
Recording Function (REC): When connected to a microphone (wireless or wired) and with a storage USB flash drive or TF card inserted (up to 32GB), the device can record audio. Recordings can then be played back.

Important Technical Specifications

Output Power: 25W
Output Impedance: 4Ω
Frequency Response: 80Hz-18KHz
Charging Voltage: DC 5V 2A
Charging Time: 4-5 hours
Amplify Time: 8-10 hours
Music-play Time: 3-7 hours
Sensitivity: 550 ± 30mV
S/N Ratio: ≥70dB
Support TF Card: ≤32G
Battery: 2*2000mAh lithium battery
Work Temperature: -10°C - 45°C
Speakers: 4-inch Bass Speaker and 1.5-inch Treble Speaker
Sound Coverage: Up to 2000m²
Bluetooth Version: 5.0
Wireless Microphone Frequency Response: 30Hz-23KHz
Wireless Microphone Output Resistance: ≤2.2KΩ
Wireless Microphone Sensitivity: -41dB±1dB (0dB=1V/Pa)
Wireless Microphone Recharging Voltage: DC 5V 500mA+
Wireless Microphone Working Time: 3-5 hours
Wireless Microphone Charging Time: 2-3 hours

Usage Features

Power and Volume Control:

Rotate the knob to "on" to turn on the speaker; rotate clockwise to increase volume, counter-clockwise to decrease volume. Rotate to "off" to turn off.

Digital Display Screen:

Displays FM radio frequency and music play time.

Mode Selection:

Short press the "M" button to cycle through TF card mode, USB flash drive mode, Bluetooth mode, FM mode, and UHF mode.

Bluetooth Function:

Pairing: Switch on the speaker, press the Bluetooth button to enter Bluetooth mode (indicated by a flashing Bluetooth icon and voice prompt "Bluetooth is waiting for connection"). Turn on your mobile phone's Bluetooth, search for "ZW-H6", and connect. A voice prompt "Bluetooth is connected" confirms success.
True Wireless Stereo (TWS):
1. Turn on two ZW-H6 speakers and press the Bluetooth button on both.
2. Long press the "M" button on one speaker to enter pairing status. When the Bluetooth icon on the other speaker stops flashing, they are successfully connected.
3. Turn on your device's Bluetooth, search for "ZW-H6", and pair. Both devices will play simultaneously.
4. Long press "M" on one speaker to exit TWS mode.

Recording (REC) Function:

To Record: Connect a microphone (wireless or wired) and insert a storage USB flash drive or TF card (max 32GB). Long press the "•" button. The screen will indicate recording has started.
To Stop Recording: Short press "•" again to save the audio file and begin playing recordings.
To Play Recordings: In music mode, short press "•" to enter recordings play mode. It will play the last recording by default. Use the "previous" and "next" buttons to select other recordings.

Play/Pause:

In music play mode, short press the play/pause button to pause; short press again to play.
Double press the play/pause button to close the voice prompt; double press again to turn on the voice prompt.

Navigation:

Next Audio File: Short press the "next" button. Long press for fast forward.
Previous Audio File: Short press the "previous" button. Long press for fast rewinding.

Microphone Volume:

Rotate the MIC volume knob clockwise to increase volume, counter-clockwise to decrease.

USB Port & TF Card Slot:

Supports USB flash drives and TF cards up to 32GB with MP3/WAV/WMA format.
Automatically plays music files upon insertion. Use "previous" and "next" buttons to select songs.

UHF Wireless Microphone Operation:

Pairing:
1. Turn on the speaker. Fast and short press "M" 3 times to enter UHF wireless pairing status (voice prompt "UHF is waiting for connection").
2. Switch on the UHF wireless MIC and long press its pairing button for 5 seconds. Pairing is successful with voice prompt "UHF is connected".
Microphone Volume Control: Short press "+" on the wireless microphone to increase volume, short press "-" to decrease.
Disconnecting: Long press the pairing button on the wireless microphone to disconnect (voice prompt "UHF is disconnected"). Repeat steps 1 and 2 to re-pair.

Maintenance Features

Speaker Charging:

Low Battery Indication: The battery icon on the screen flashes continuously.
Charging Process: Use a standard DC 5V 2A power adapter. The screen battery icon will flash during charging.
Full Charge Indication: The battery icon stops flashing and remains lit.
Charging Time: Normally 4-5 hours. Unplug the adapter after fully charged.
First Use: It is recommended to fully charge the speaker before its first use for best effect.
Operation During Charging: It is suggested to stop other operations while charging. Cut off the power supply first if you need to use it.

UHF Wireless Microphone Charging:

Low Battery Indication: The blue light blinks.
Charging Process: Push the microphone switch to "OFF". Connect one end of a Micro USB connector to the microphone's DC 5V interface and the other end to a charger/power socket. The red light will be on during charging.
Full Charge Indication: The red light will go out. Unplug the charger as soon as it is charged.

General Maintenance and Troubleshooting:

Howling Prevention: When speaking, aim at the MIC capsule and keep the distance between the voice amplifier and MIC longer than 60cm.
No Sound from Speaker (UHF Mic paired): Re-pair the Mic and speaker if the connection is lost.
Connector Care: Avoid frequent insertion/plugging of connectors to prevent looseness or bad connections.
Timely Recharge: Recharge the battery when power is low.
Accessories: Use original accessories if replacements are needed.
Repairs: Non-professional technicians are not allowed to dismantle or repair the product. Contact a local agent for service.
Storage: Keep the amplifier in a dry and ventilated area. Avoid rain, water, and thumps.
Safety: Keep the product and accessories away from children.
Power Off: Switch off the speaker when not in use to avoid power loss.

Troubleshooting Common Problems:

Speaker won't switch on: Recharge the battery.
No audio input: Use another audio file.
No sound/sound distortion: Adjust volume, check if the speaker is broken (contact for maintenance).
No sound with Karaoke: Insert MIC properly, switch on MIC, turn on MIC volume. If using UHF wireless MIC, re-pair or recharge the wireless MIC.
No sound with MP3 playing: Ensure audio format is MP3, restart the speaker, insert USB/TF card properly.
Music staccato: Check if the device is beyond the effective Bluetooth range (33 ft) or if there are too many obstacles. Clear any barriers.

Warranty:

Zoweetek offers 100% product satisfaction, operation guidance, and a 1-year warranty. Contact support@zoweetek.cn for questions.

Zoweetek ZW-H6 Specifications

General

Brand	Zoweetek
Model	ZW-H6
Category	Speaker System
Language	English