• Pass phrase: Enter the password manually.
If the security mode is SHARED, the bottom part of the configuration page displays parameters as shown
below:
WEP Keys: At most four keys can be set in the WEP key fields. Choose the primary key index. The
primary key is the only key in use at a given time. Whatever keys you enter for an access point, you
must also enter the same keys for the client adapter in the same order. In other words, WEP key 1 on the
AP must match WEP key 1 on the client adapter; and WEP key 2 the same. A WEP can be in HEX form
with either 10 or 26 hexadecimal digits (0~9,a~f and A~F) and in ASCII form with either 5or 13 ASCII
code.
If the security mode is OPEN, the bottom part of the configuration page displays WPA parameters.