Client PIN:
Enter the client PIN. As required, the PIN should be 8 digits.
PBC：
1. Select PBC mode in the Client WPS UI;
2. Select PBC mode in the WPS page of the 4G Mobile Hotspot and submit; H
3. Once the WPS is enabled, please press the "next" button on the Client WPS UI. After a few seconds the
client can access the WLAN, and the result will be shown in the Client WPS UI.
Click Apply to confirm your configuration.
Usage of WPS
WPS of your 4G Mobile Hotspot is disabled by default. Before using, you need to enable it in the
To Next Page
Loading...
