WebGUI configuration page (Settings > Wi-Fi Settings > WPS) or by pressing the WPS button at right
side of the device.
If your client device supports WPS, you will not need to input the password manually after WPS has been
available. Please follow the steps below:
1. Start up your 4G Mobile Hotspot.
2. Launch the client device connected to your 4G Mobile Hotspot.
3. Enable the WPS function of your 4G Mobile Hotspot.
4. Enable the WPS function of the connecting client.
Notes:
For detailed operations about the client, please refer to the client’s User Guide.
Settings > Firewall
You may setup firewall rules to protect your network from virus, worm and malicious activity on the
Internet.
Notes:
You can set maximum 10 filtering items for MAC/IP/Port Filtering and Port Forwarding.
MAC/IP/Port Filtering
Select Settings > Firewall > Mac/IP/Port Filtering,
If you select Enable, the filter settings will appear:
To Next Page
Loading...
