EasyManua.ls Logo

Zte Blade A3 Prime - System Sounds and Volume

Zte Blade A3 Prime
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Turning System Sounds On/Off
1. Swipe up on the home screen and touch Settings > Sound >
Advanced.
2. In the Other sounds and vibrations section, touch the switches
beside each option to turn it on or off.
Adjusting Volumes
1. Swipe up on the home screen and touch Settings > Sound.
2. Drag the sliders below Media volume, Ring volume, Alarm
volume, Notification volume, and Call volume to adjust the
volume for each type of audio.
Switching to Silent or Vibration Mode
You can set the phone to silent or vibration mode by using one of
the following methods.
NOTE:
Silent and vibration modes will not silence your alarms.
Press the Volume key and touch or to switch the
phone to vibration or silent mode.
NOTE:
Press the Volume key and touch to restore sound.
Swipe up on the home screen and touch Settings > Sound >
Notification mode and select Vibrate or Mute to switch to
vibration or silent mode.

Table of Contents

Other manuals for Zte Blade A3 Prime

Related product manuals