秘密 Confidential▲
<
以上所有信息均为中兴通讯股份有限公司所有，不得外传
>
All Rights reserved, No Spreading abroad without Permission of ZTE
Blade A530 Upgrade Guide (Through an SD Card)
The software version and pictures in this document are just for
reference only. Please use ZTE handset support website provided version
to download software.
1) Download the upgrade package.
Open http://www.ztedevice.com.cn/support and download the upgrade
package (update.zip) that matches your phone model. If the
downloaded package is not update.zip, unzip the package to obtain
update.zip.
Ensure that your micro SD card is at least 4GB.
Note：Please refer to our current version download size.
2) Suggest using a third-party APP backup data before the upgrade
3) Remove the SIM card before the upgrade.
4) Verify that the update.zip file in the root directory of the SD card
matches the model of the phone. Do not modify the file name and
extension name of the files in the upgrade package.
5) Verify that your phone has enough (at least 40%) power. Charge the phone
if required. To avoid data lost or upgrade failure, it is not recommended to
upgrade your phone through an SD card when the phone is being charged.
6) You should not perform any other operation on the phone during the
upgrade process.
7) A normal upgrade should be completed in 10-15 minutes. If the phone does
not reboot or show any response in 15 minutes, you should perform the
upgrade process again. If the phone cannot be started, perform a forced
upgrade. If the forced upgrade does not work, you should contact an
after-sale service agent for support
.
There are two upgrade methods: normal upgrade and forced upgrade.
If the phone cannot be started properly, for example, the phone cannot be
started, or the phone does not enter standby state, perform a forced upgrade.
If the phone can be started properly and the Settings menu can be selected,
perform a normal upgrade.
A. Normal upgrade (the primary upgrade method)
To Next Page
Need help?
General
