21
password each time you power on your phone.
WARNING!
Encryption is irreversible. The only way to revert to an
unencrypted phone is to perform a factory data reset which
erases all your data.
Encryption provides additional protection in case your phone is
stolen and may be required or recommended in some
organizations. Consult your system administrator before turning it
on. In many cases the PIN or password you set for encryption is
controlled by the system administrator.
Before turning on encryption, prepare as follows:
• Set a lock screen PIN or password.
• Charge the battery.
• Keep the phone connected to the charger.
• Schedule an hour or more for the encryption process. You
must not interrupt it or you will lose some or all of your data.
When you're ready to turn on encryption:
1. Touch Settings > Security > Encrypt phone on the Home
Screen.
2. Read the information about encryption carefully.
The Encrypt phone button is dimmed if your battery is not
charged or your phone is not plugged in.
If you change your mind about encrypting your phone, touch
the Back Key.
WARNING!
To Next Page
Loading...
