Zte Boost Warp 4G - Wi-Fi Direct; Connect to Another Device Via Wi-Fi Direct

Web and Data 104
Connect to a VPN
1.
Touch > >Settings>More…> VPN.
2. TouchtheVPNthatyouwanttoconnectto.
3. Whenprompted,enteryourlogincredentials,andthentouchConnect.Whenyouare
connected,aVPNconnectediconappearsinthenotificationareaofthestatusbar.
4. OpentheWebbrowsertoaccessresourcessuchasintranetsitesonyourcorporatenetwork.
Disconnect From a VPN
1. SlidethestatusbardowntoopentheNotificationspanel.
2. TouchtheVPNconnectiontoreturntotheVPNsettingsscreen,andthentouchtheVPN
connectiontodisconnectfromit.
WhenyourphonehasdisconnectedfromtheVPN,youwillseeaVPNdisconnectediconinthe
notificationareaofthestatusbar.
Wi-Fi Direct
Wi-FiDirectallowsWi-Fidevicestoconnecttoeachotherwithouttheneedforwirelessaccess
points(hotspots).
Connect to Another Device via Wi-Fi Direct
YoucanconnectyourphonetoanotherdeviceenabledwithWi-FiDirectconnection.
1.
Touch > >Settings>Wi-Fi.
2. IfWi-Fiisoff,touchtheWi-Fislidertoturniton.
3.
Touch >Wi-Fi Direct.
4. YourphonewillsearchforotherdevicesenabledwithWi-FiDirectconnections.
5. TouchadevicenameunderPEERDEVICEStoconnectwithit.
Note:ThetargetdevicemustalsohaveWi-FiDirectserviceactivatedandrunningbeforeitcanbe
detectedbyyourphone.
6. TheotherdevicewillreceiveaWi-FiDirectconnectionpromptandneedtoaccepttherequest
forconnection.BothdevicesmayneedtoenteracommonPIN.
7. Onceconnectedthedeviceisdisplayedas"Connected"inthedevicelist.
Note:YoucantouchRENAMEDEVICEtoedityourphonenamewhichotherdevicescansee
whentheyaresearchingviaWi-FiDirect.