Zte Fanfare - Entering Text; TouchPal Keyboard Layouts and Features

32
33
The T+ layout
Tap to enter the left letter on the key. Double-tap or ick
right to enter the right letter/symbol on the key. Press
and hold a key and slide left or right to choose more
letters and symbols.
If word prediction is enabled, just tap the keys and
choose the right word.
Enabling and Using Touchpal Curve
1. On the TouchPal X keyboard screen, tap > Settings > Smart input and
check Curve® - Word gesture.
2. Move your nger from letter to letter on the keyboard to trace a word
without lifting the nger until you reach the end of the word.
Note: Curve is only available in the Full layout.
Notes:
• Tap to type when you want to. If you want to enter a single letter, simply tap
the key once.
• Lift your nger at the end of the word. A space is added automatically
when you begin to trace the next word.
Input settings
Choose input settings by tapping > Settings > Language & input from the
home screen.
In the KEYBOARD & INPUT METHODS section, you can set the default input
method and choose the settings for input methods.
Editing text
• Move the insertion point: Tap where you want to type. The cursor blinks in
the new position, and a tab appears below it. Drag the tab to move the
cursor.
• Select text: Press and hold or double tap within
the text. The nearest word highlights, with a tab at
each end of the selection. Drag the tabs to change
the selection.
• Cut or copy: Select the text you want to manipulate.
Then tap the Cut
or Copy button to cut or
copy the text to the clipboard.
• Replace text with the clipboard text: Select the text
you want to replace. Then tap
or PASTE.
• Insert text from the clipboard: Move cursor to the
insertion point and then press and hold the tab
below the cursor. Release your nger and tap PASTE.
KNOWING THE BASICS KNOWING THE BASICS
End of the word
Start of the word