35
Touch a key repeatedly until the desired letter or symbol
appears. If word prediction is enabled ( ), just touch the
keys once and choose the right word.
CooTek T+
Touch to enter the left letter on the key; Double-tap or flick
right to enter the right letter/symbol on the key. If word
prediction is enabled ( ), just touch the keys and choose
the right word.
To enable and use TouchPal Curve:
1. In the TouchPal keyboard screen, touch and tick the
Curve check box, and then touch Close.
2. Move your finger from letter to letter on the keyboard to
trace a word without lifting the finger until you reach the end
of the word.
NOTE: TouchPal Curve is only available in the Full QWERTY
layout.
To Next Page
Loading...
