ZTE H108N V.2.1 Configuration manual
Page 40 ZTE Proprietary and Confidential
3.1.2 MAC Filtering
Select MAC Filtering. The page shown in the following figure appears.
Choose Enable Access Control Mode, and then click Add to add a MAC
Address as shown in the following figure. You can get the MAC address of your
connected devices in the “local network” chapter former in this document.
This will help you to restrict who can connect to your WiFI network. Click Apply
to finish.
Note:
Before enabling this option please add your own address to the list
first. Otherwise you won’t be allowed into your own WIFI. If this
happens somehow you will need to connect to the router by cable to
fix or disable this protection.
To Next Page
Loading...
