ZTE H108N V.2.1 Configuration manual
Page 43 ZTE Proprietary and Confidential
The following table describes the parameters of this page.
To enable WPS function and be able to set the
following settings.
The name of your wireless network.
Select the mode either Registar or Enrollee.
Registrar: the router will act as a credentials
server and will permanently accept incoming
connections with a PIN introduced at the client
PC side.
Enrollee (default): when PC tries to connect,
you need to enter the PIN (or press button) on
the router side. This avoids hacking attempts.
To Next Page
Loading...
