ZTE H108N V.2.1 Configuration manual
Page 55 ZTE Proprietary and Confidential
The device loads the file and reboots automatically. If you checked the “clear
config” option, the router will revert to factory settings, which is the proper
configuration for your Internet Provider (printed on the case of the router).
Note:
Do not turn off your device or press the reset button while an
operation in this page is in progress.
Note:
The H108N V.2.1 has built-in a dual bank memory. After the reboot the
“Internet LED” will blink green/red for some minutes while it upgrades
the secondary bank. It is recommended to wait until finished.
This secondary bank helps boot when the main memory is corrupted
somehow or wrong upgrade (detected by wrong CRC).
To Next Page
Loading...
