Administrator main menu operation
32
3. the incoming call’s number isn’t in the white list and the
white list reaches its limit
Get phone status #getstatus#[pin]#
Set access mode #accessmode*wl|fr#[PIN]#
wl: White list access mode(After you connect with the
monitor, you need to input the pin code before you access
the operation menu.)
Fr: Free access mode(After you connect with the monitor,
you can access the operation menu.)
Set power ring volume level #powerringvolume*[x]#[PIN]#
X=0,1,2,3
Clear the White list #clearwl#[PIN]#
Note:
1) SMS commands can only be sent by the administrator’s mobile phone number. The SMS will
not be recognized by the Mobile Cam if a command is sent from another mobile phone number.
2) All commands can be in lower-case or upper-case letters.
3) Command explanation.
[number]: Indicates a valid mobile phone number. The phone number’s maximum length is 20
digits . ( “+” will be ignored).
[pin]: Indicates user PIN code. It should be in 4 digits.
[newpin]: Indicates new user PIN code. It should be in 4 digits.
To Next Page
Loading...