Zte Z291DL - WI-FI BASIC SETTINGS

WI-FI SETTINGS
Basic Settings
Select Settings > Wi-Fi Settings > Basic Settings. The wireless network basic
parameters are shown in the following figure:
• Network Name (SSID): Service Set Identifier (SSID). Enter a string less than
32 characters as the name for your wireless local area network (WLAN).
• Broadcast Network Name (SSID): Disable or Enable (Default) this function.
If Enable is selected, the device broadcasts the SSID, and other devices
can search and connect to it. When you select Disable, other devices
cannot search for the SSID. If you want someone to connect, you need to
tell them the SSID, and let them setup manually.
• Security Mode: The security modes are described below:
SETTINGS
28