• Alert Type: Set the ring type (e.g. vibrate, ring, vibrate and ring, and
ascending ringtone).
• Receiver Volume: Set the volume of the receiver.
• Message Tone: Set the notification ringtone for an incoming SMS or
MMS message.
• Key Tone: Enable or disable keypad tones when dialing.
• Warning Tone: Turn the warning tone on or off.
• Power On/Off Tone: Turn on/off the sound that plays while powering
on/off the phone.
• Missed Calls Alert: Enable, disable, and set timing for the missed calls
audible notification.
Call Settings
From the home screen, select Main Menu Settings Call Settings.
Earphone Auto Answer: You can configure the phone to answer incoming
calls automatically when an earphone is connected to the phone.
Any Key to Mute: This option allows you to silence the ringtone by
pressing any key when there is an incoming call.
Connection Reminder: When a call connects, you will hear a three-tone
beep to notify you that the connection was successful.
Minute Reminder: When this setting is enabled, you will hear a short beep
every minute while a call is in progress. You will hear the first beep after 50
seconds, then 1 minute 50 seconds, etc.
Send My Caller ID: This function allows you to prevent others from seeing
your phone number when making outbound calls.
44 Settings
To Next Page
Loading...
