EasyManua.ls Logo

Zte ZTE-J G500 - PTT Call Management; End; Exit PTT Calls; Functions during PTT Calls; PTT Watching Function

Zte ZTE-J G500
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
End / Exit PTT Calls
In private calls, press the End Key or select End Call to end a call.
In group calls, press the End Key to exit from a group call.
The group caller or leader can select End Call to end a group call.
Note: Contact your network service provider for detailed PTT call
authorities.
Functions during PTT Calls
Press the Volume Up / Down Keys to adjust the volume.
Press the OK Key to activate or deactivate the speaker.
Select the Left soft key [Option] > Record On to record the call.
Note: Recording the call need to insert T-card first.
PTT Watching Function
This function enables your phone receive the group calls which are set in
the current watching list. Only 3 groups can be set as watching group at
the same time.
Set PTT Watching Function
1. In standby mode, select Left soft key [Menu] > PTT Settings >
Watching Function;
2. Select On or Off to activate or deactivate PTT watching function.
Set PTT Watching List
1. In standby mode, select Left soft key [Menu] > Contacts > PTT
System Group;
2. Press the Up / Down Keys to select a group and then select Watch to
add the group into the watching list.
Notes: The current speed dial group is as watching group by default.

Table of Contents

Related product manuals