Zte ZXA10 C300 - Page 126

ZXA10C300CongurationManual(CLI)
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#smartgroup1modeactive
Note:
TheZXA10C300supportsthefollowingthreeportaggregationmodes:
lOn:Staticaggregationtrunk.Thetwoendsoftheaggregationneedtobesetto
theonmode.
lActive:LACPactivenegotiationmode
lPassive:LACPpassivenegotiationmode
Itisrecommendedtosettheportatoneendtotheactiveaggregationmode,andset
theportattheotherendtothepassiveaggregationmode,orsetportsatbothendsto
theactiveaggregationmode.
8.Congurethetimeoutmodeoftheport.
ZXAN(config-if)#lacptimeoutlong
Note:
TheZXA10C300supportsthefollowingtwoLACPtimeoutmodes:
lLong(default):TheadjacentportsendsaLACPDUpacketevery30s.
lShort:TheadjacentportsendsaLACPDUpacketeverysecond.
TheLACPtimeoutmodeisvalidonlywhentheportisinactiveorpassiveaggregation
mode.
9.Congureotherportintheaggregationgroup.
ZXAN(config)#interfacegei_1/21/2
ZXAN(config-if)#smartgroup1modeactive
ZXAN(config-if)#lacptimeoutlong
10.(Optional)Querythesmartgroupstatus.
ZXAN(config-if)#showlacpinternal
Smartgroup:1Switchattribute:TRUEMode:802.3ad
Flag*--LoopisTRUE
ActorAggLACPDUsPortOperPortRXMux
PortStateIntervalPriorityKeyStateMachineMachine
-----------------------------------------------------------------------------
gei_1/21/1inactive30327680x1000x45port-disableddefaulted
12-4
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential