Zte ZXA10 C300 - Configuring the TDM Relay Service

ZXA10C300CongurationManual(CLI)
ZXAN(config)#ipmpls-forwardingenable
ZXAN(config)#mplsldprouter-idloopback1
ZXAN(config)#mplsip
7.ConguretheLDPtargetsession.
ZXAN(config)#mplsldptarget-session2.2.2.2
8.ConguretheVC.
ZXAN(config)#pw2and2001pw
ZXAN(config-pw)#modedynamicpwe3fec128
ZXAN(config-pw)#pwtypeethernet
ZXAN(config-pw)#peer2.2.2.2router-id2.2.2.2vcid2001
ZXAN(config-pw)#exit
9.ConguretheVLL.
ZXAN(config)#vllmspw-vll
ZXAN(config-vll)#service-typeethernet
ZXAN(config-vll)#mplsxconnectpw2and2001pw
ZXAN(config-vll)#exit
10.Conguretheclassmap.
ZXAN(config)#class-mapclassmap2001
ZXAN(config-cmap)#matchsvlan-id2001
ZXAN(config-cmap)#exit
11.ConguretheCIP .
ZXAN(config)#cip1
ZXAN(config-cip1)#service-typeethernetclass-mapclassmap2001
ZXAN(config-cip1)#xconnectmspw-vll
ZXAN(config-cip1)#exit
12.Savethecongurationdata.
ZXAN(config)#exit
ZXAN#write
Buildingconfiguration...
.........................[OK]
Result
ThetwoONUscanpingeachothersuccessfully.
16.4.3ConfiguringtheTDMRelayService
ThoughthePWE3emulation,theTDMservicecanbecarriedoverMPLSnetwork.
NetworkingDiagram
Figure16-22showsthenetworkingdiagramoftheTDMrelayservice.
16-68
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential