EasyManua.ls Logo

Zte ZXHN F668 - Product Appearance

Zte ZXHN F668
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.4 Product Appearance
Front Panel
Figure 1-1 ZXHN F668 Front Panel
Table 1-1 lists LEDs on the front panel.
Table 1-1Front Panel LEDs
Page 4
LED
Status
Description
Power
Solid Green The device is powered on.
Off The device is powered off.
PON
Solid Green The device is registered and the link is activated.
Off The device is not discovered or registered.
Flashing The device is attempting to register or set up the connection.
LOS
Solid Red The device has an optical power problem.
Off The device is receiving optical power.
Alarm
Solid Red The device is has discovered a problem.
Off The device is working normally
Flashing The device is downloading or updating the version
LAN1-LAN4
Solid Green The network interface is connected, but no data is being transmitted.
Off The device is powered off or the interface is not connected to a network device.
Flashing The network interface is connected and data is being transmitted.
POTS1-POTS2
Solid Green The device is registered at the Soft Switch but no data is being transmitted.
Off The device is powered off or failed to register on the Soft Switch.
Flashing The device is registered and data is being transmitted.
WLAN
Solid Green The Wireless LAN function is enabled.
Off The device is powered off or the Wireless LAN function is disabled.
Flashing Wireless data its being transmitted.
WPS
Yellow WPS is being established.
Green WPS is complete.
Red WPS fails.
USB
Solid Green USB storage device is connected but not transmitting data.
Off USB storage device is not connected.
Flashing USB Interface is transmitting data.
Battery
Solid Green The battery is connected and in good condition.
Off The battery is not connected.
Flashing The battery is connected but there is an abnormal status.

Related product manuals