ZXHN H3600 Maintenance Management Guide
Figure 2-3 The Side Panel
Table 2-4 describes the interfaces and buttons on the side panel of the ZXHN H3600.
Table 2-4 Descriptions of the Side Panel
Interface/Button Function
WAN RJ-45 port. It is used to connect to the uplink Ethernet access network.
LAN1\LAN2\
LAN3\LAN4
RJ-45 port. It is used to connect the modem to computer, STBs or other
network devices.
USB
Standard USB 2.0 interface, connected to a USB storage device, printer or
3G Dongle connection.
PHONE1 RJ-11 port. It is used to connect to the phone through the telephone line.
10 SJ-20201203151144-003 | 2021-06-16(R1.0)
To Next Page
Loading...
