Zte ZXHN H3600 - Configure the ALG

ZXHN H3600 Maintenance Management Guide
Figure 5-21 Remote Service Port Control - IPv4 Page
Table 5-15 lists the remote service port control - IPv4 parameters.
Table 5-15 Parameter Descriptions for the Remote Service Port Control - IPv4
Parameter Description
HTTP The remote service port control of HTTP.
FTP The remote service port control of FTP.
TELNET The remote service port control of TELNET.
HTTPS The remote service port control of HTTPS.
2. Click Apply button to apply the changes.
5.4.4 Configure the ALG
The section describes how to configure ALG. ALG provides the relevant parameters of
security configuration function.
Steps
1. On the main page of the ZXHN H3600, select Internet > Security > ALG to the ALG
page, the page see Figure 5-22.
38 SJ-20201203151144-003 | 2021-06-16(R1.0)