Zte ZXHN H3600 - Page 71

6 Configure the Local Network
The relevant information of Internet status includes Routing Table, Static Routing and
Policy Routing.
Prerequisite
Before configuring routing(IPv6), make sure that the IPv6 WAN connection is created.
Steps
Check the Routing Table
1. On the main page of the ZXHN H3600, select Local Network > Routing > IPv6 to
the Routing(IPv6) page.
2. Click Routing Table to the configuration page, see Figure 6-20.
Figure 6-20 Routing Table Page
3. Click Refresh to refresh the information.
Configure the Static Routing
1. Click Static Routing to the configuration page, see Figure 6-21.
Figure 6-21 Static Routing(IPv6) Page
2. Configure the static routing parameters. Table 6-14 lists the static routing parame-
ters.
SJ-20201203151144-003 | 2021-06-16(R1.0) 65