Zte ZXHN H3600 - Configure the DNS

ZXHN H3600 Maintenance Management Guide
Figure 6-26 Samba Service
Table 6-19 lists the samba service parameters.
2.
Table 6-19 Samba Service parameters
Parameter Description
Samba Service Click On to enable the samba service function manually.
Click Off to disable the samba service function.
Click Auto On After Detecting USB Storage Plugged: If
detecting USB Storage Plugged, it will enable the samba
service function automatically.
Host Name The name of samba host.
Anonymous Click On to enable the anonymous function.
Click Off to disable the anonymous function.
Samba Username/Samba Pass-
word
It is valid only if Anonymous is disabled.
3. Click Apply button to apply the changes.
6.9 Configure the DNS
The section describes how to configure DNS. DNS provides the parameters of DNS
configuration features.
The relevant information of Internet status includes Domain name and Host Name.
Steps
Configure the domain name
1. On the main page of the ZXHN H3600, select Local Network > DNS to open the
Domain name page, see Figure 6-27.
70 SJ-20201203151144-003 | 2021-06-16(R1.0)