Interface/
Button Function
WPS WPS Push Button.
Reset
Reset pinhole: During power on period, hold on this
button for more than 5 seconds to reset the current
settings to the factory default.
LAN1-LAN2
RJ-45 port: Used to connect the modem to PCs, STBs
or other network devices.
WAN
RJ-45 port: Used to connect to the uplink access
network.
Power
Power supply socket: Used to connect to the power
adapter.
4
Hardware Connection
Figure 4-1 shows the devices that are connected to interfaces of the
ZXHN H3601P.
Figure 4-1 Cable Connection
To Next Page
Loading...
