Verify that the cable connections are correct and press the on/off button.
After the power indicator is lit and other indicators operate properly, services
of the carrier can be used.
Access the Internet
Wi-Fi: Get the default SSID and password on the label (Wi-Fi Key) and
connect to the Wi-Fi network with your mobile device, and then access the
Internet.
Network cable (RJ45): Connect with the computer via LAN ports and then
access the Internet as shown above.
The factors affecting the wireless network coverage range include the
location of the product, distance between the product and a wireless
terminal, number of obstacles, obstacl
e material and density, and
interference source. It is recommended that you place the product in
accordance with the following principles to maximize the strength of
wireless signals.
The product should be far away from the objects affecting wireless signal
propagation, for example, an object with a high reflectivity such as a
metallic object or a mirror.
The product should be far away from an electrical appliance with a
strong magnetic or electric field, for example, a microwave oven, a
refrigerator, a wireless router, a cordless phone, or a Bluetooth product.
The product should be installed on the same floor as the applied
area.
Do not put other objects on the product. Try to reduce the number of
obstacles between the product and a wireless terminal.
Horizontally place the product in the middle of the applied area and do
not put it in a corner.
Do not place the product at a high position while it is placed
horizontally. The recommended height is 1.2 to 1.5 meters.
To Next Page
Loading...
