Zte ZXR10 2900 Series - Basic Configuration of LACP

ZXR102900SeriesUserManual
asTrunk.Itallowsparallelphysicallinksbetweentheswitchesor
betweentheswitchandtheservertoincreasethebandwidthin
multiplesandsimultaneously.Asaresult,itbecomesanimport
technologyinbroadeninglinkbandwidthandcreatinglinktrans-
missionexibilityandredundancy.
Aggregatedlinkisalsocalledtrunk.Ifaportofthetrunkisblocked
orfaulty,thedatapacketswillbedistributedtootherportsofthis
trunkfortransmission.Ifthisportrecovers,thedatapacketswill
bere-distributedtoallthenormalportsofthistrunkfortransmis-
sion.
ZXR102920/2928/2952/2936-FIsupportsupto15aggregation
groups.Ineachaggregationgroup,thenumberoflinksparticipat-
ingintheaggregationdoesnotexceedeight.Linksparticipating
intheaggregationmusthavethesametransmissionmediatype
andthesametransmissionrate.
BasicConfigurationofLACP
LACPcongurationontheswitchincludesthefollowingcontents:
CommandFunction
zte(cfg)#setlacp{enable|disable}Thisenablesordisables
LACPfunction.By
default,theLACP
functionisdisabled.
zte(cfg)#setlacpaggregator
<trunkid>addport<portlist>
Thisaddsaspecied
porttoLACP
aggregationgroup.
zte(cfg)#setlacpaggregator
<trunkid>deleteport<portlist>
Thisdeletesaspecied
portfromLACP
aggregationgroup.
zte(cfg)#setlacpaggregator<trunkid>
mode{dynamic|static|mixed}
Thissetsaggregation
modeofaggregation
group.
zte(cfg)#setlacpport<portlist>timeout
{long|short}
Thisconguresthe
timeoutinformationof
theportparticipatingin
theaggregation.
zte(cfg)#setlacpport<portlist>mode
{active|passive}
Thissetsthemode
usedbytheport
toparticipateinthe
aggregation.
zte(cfg)#setlacppriority<1-65535>
Thissetsthepriorityof
LACP .
zte(cfg)#showlacpThisdisplaysthe
LACPconguration
information.
92CondentialandProprietaryInformationofZTECORPORATION