Zte ZXR10 2900 Series - EPON

ZXR102900SeriesUserManual
CommandFunction
zte(cfg-nas)#iptvpackagename<packag
e-name>channel{id-list<channel-idlist>|
name<channel-name>}[deny|permit|
preview]
Thisaddsthechannelto
themulticastpackage
andsetsmulticast
authority.
zte(cfg-nas)#showiptvpackage
[name<package-name>|id<package-id>]
Thisdisplaysthe
multicastpackage
zte(cfg-nas)#iptvprv{enable|disable}Thisenables/disables
iptvpreview.The
defaultisdisable.
zte(cfg-nas)#iptvprvresetThisresetsiptvpreview
timerto0.
zte(cfg-nas)#iptvprvautoreset-time
<HH:MM:SS>
Thissetsiptvpreview
autoreset-time.The
defaultvalueis
00:00:00.
zte(cfg-nas)#iptvprvrecognition-time
<1-65534>
Thissetsiptvpreview
recognition-time.The
defaultvalueis4
seconds.
zte(cfg-nas)#iptvprvovercount-cdr
{enable|disable}
Thisenablesor
disablesiptvpreview
overcount-cdrfunction.
Thedefaultisdisable.
zte(cfg-nas)#showiptvprvThisdisplaysiptv
previewglobal
conguration.
zte(cfg-nas)#iptvview-profilename<
viewfile-name>[id<view-profile-id>]
Thiscreatesiptv
previewconguration
les.
Theparametername<
viewfile-name>:1-60
characters.
zte(cfg-nas)#cleariptvview-profile{
name<viewfile-name>|id-list<view-prof
ile-idlist>}
Thisdeletesiptv
previewconguration
les.
zte(cfg-nas)#cleariptvview-profileall
Thisdeletesalltheiptv
previewconguration
les.
zte(cfg-nas)#iptvview-profilename
<viewfile-name>count<view-count>
Thissetsthemaximum
previewtimes.
Theparametername
<viewfile-name>:1-60
characters
Theparametercount
<view-count>:
maximumpreview
times,1~200andthe
defaultis3.
126CondentialandProprietaryInformationofZTECORPORATION