Zte ZXR10 2900 Series - EPON Service Switch Configuration

Chapter7ServiceConguration
CommandFunction
zte(cfg)#showeponfirmware-infor
ThisshowsPON
subboardrmware
informationandEPON
systemconguration
information.
6.ToshowportinformationofPONsubboard,usethefollowing
command.
CommandFunction
zte(cfg)#showeponportThisshowstheport
informationofPON
subboard.
7.ToshowOAMinformationofPONsubboardport,usethefol-
lowingcommand.
CommandFunction
zte(cfg)#showeponportoamThisshowsOAM
informationofPON
subboardport.
8.ToshowPONscheduleinformation,usethefollowingcom-
mand.
CommandFunction
zte(cfg)#showeponscheduleThisshowsPON
scheduleinformation.
EPONServiceSwitchConfiguration
WhenZXR1029290/2928actsasONUdevice,apartofservices
willbechanged.Thefollowingcontentsdescribethedifferences
betweenaddedwithPONdaughtercardorwithoutPONdaughter
card.
1.Portconguration
CommandFunction
zte(cfg)#setport<portlist>vlan-mode
{transparent|tag|translation}
Thisconguresthe
functionmodeofport
onVLAN.
transparent:transparentmode.
tag:tagforwardingmode.
translation:VLANtranslationmode.
CondentialandProprietaryInformationofZTECORPORATION141