Zte ZXR10 2900 Series - Page 79

Chapter7ServiceConguration
CommandFunction
zte(cfg)#setport<portlist>default-pri
ority<0-7>
Thissetsthedefault
priorityofaport.
ItisaQoSrelated
congurationcommand
andusedtospecifythe
priorityofuntagpacket
receivedfromthisport.
Thedefaultpriority
valueis0.
zte(cfg)#setport<portlist>remapping-
tag<0-7>priority<0-7>
Thissets802.1Ppriority
remappingonaport.
Thisisacommand
relatestoQoS.
Theportreceivesa
packetwithtagwhich
includesprioritysetting
information.Thepacket
ismappedaccordingto
thesettinginformation
inthepacket.
zte(cfg)#setport<portlist>security
{enable|disable}
Thisenablesordisables
thesecurityfunctionon
port.
Thisfunctionis
usedforaccess
andauthentication.
Securityfunctionis
disabledbydefault.
zte(cfg)#setport<portlist>unit-statistics
{enable|disable}
Thisenablesordisables
thestatisticsfunctionof
portinunittime.
zte(cfg)#setport<portlist>multicast-fil
ter{enable|disable}
Thiscongureswhether
theportltersthe
multicastpacket.
Itcontrolsthe
forwardingofunknown
multicastpacket,
mainlycooperatingwith
thelayer2multicast
(IGMPSnooping/IPTV).
zte(cfg)#setport<portid>description
<string>
Thisconguresthe
descriptioninformation
ofport.
<string>:shouldbe
nomorethan200
characters.
zte(cfg)#setport<portlist>macaddress
{on<1-100>[unkown-filter-en]|off}
Thissetsthenumberof
MACaddressthatthe
portcanlearn.
Theparameter
unkown-lter-enisto
controltheforwarding
oftheunknownpacket
ontheport.
CondentialandProprietaryInformationofZTECORPORATION67