Zte ZXR10 2900E Series - Show Poe Config

Chapter4ServiceConguration
802.3afclassification:unknown
current-power:0watt
avgerage-power:0watt
peak-power:0watt
port:1/2
powerup:off
powerdevice:disabled
powerdevicetype:open(noload)
802.3afclassification:unknown
current-power:0watt
avgerage-power:0watt
peak-power:0watt
4.3.10showpoeconfig
Purpose
ThiscommandshowspoweroverEthernet(POE)congurationsofports.
CommandMode
Globalcongurationmode
Syntax
showpoeconfig[port<portlist>]
ParameterDescription
ParameterDescription
<portlist>
Portlist.Thecommandwithouttheportlistparametershows
POEcongurationsofallports.
Example
ThefollowingexampleshowsPOEcongurationsofallports:
zte(cfg)#showpoeconfig
port|enable|max-power|priority|extend-detection|force-power
1/1enable15.4wlowdisabledisable
1/2disable15.4wlowdisabledisable
1/3disable15.4wlowdisabledisable
1/4disable15.4wlowdisabledisable
1/5disable15.4wlowdisabledisable
1/6disable15.4wlowdisabledisable
………………………………
4-69
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential