Zte ZXR10 2928E - 3.9 File System Configuration Commands

ZXR102900ESeriesCongurationGuide
Versionupgradeoperationsperformedinproperandimproperswitchsystemsare
different.
DisplayingtheVersionInformation
Ifthesystemstatusallows,checktheversioninformationbeforeandaftertheupgrade.
Inglobalcongurationmode,usethecommandshowversiontodisplaythesystem
hardwareandsoftwareversioninformation.
Thedisplayedcontentsareasfollows:
zte(cfg)#showversion
ZXR10RouterOperatingSystemSoftware,ZTECorporation:
ZXR102928EVersionNumber:2928ESeriesV2.05.10.05
Copyright(c)2001-2012ByZTECorporation
Compiled:01:09:36Mar62012
Systemuptimeis0years0days0hours0minutes16seconds
Mainprocessor:arm926ejs
BootromVersion:v1.08CreationDate:Feb272012
SystemMemory:128MbytesSystemFlash:256Mbytes
EPLDVersion(Dno.):V1.0
PCBVersion(Dno.):V1.0
StartupFrom:net
Switch'sMacAddress:00.d0.d0.3c.3b.00
Module0:ZXR102928E;fasteth:0;gbit:28;
VersionUpgradeWhentheSystemisNormal
Iftheswitchrunsnormally,upgradetheversionasfollows:
1.ConnectConsoleportoftheswitchtotheserialportoftheback-endhostusing
theself-containedcongurationcable.ConnectanEthernetportoftheswitchto
thenetworkportoftheback-endhostusinganetworkcable.Checkwhetherthe
connectionsarecorrect.
2.SettheIPaddressoftheEthernetportontheswitch.SettheIPaddressofthe
back-endhostusedforupgrade.ThetwoIPaddressesmustbeinthesamenetwork
segmentsothatthehostcanpingtheswitch.
3.StarttheTFTPserversoftwareontheback-endhostandcongureitbyreferringto
FTPConguration.
4.Ontheswitch,usethecommandshowversiontochecktheinformationofcurrent
operatingversion.
5.Enterthelesystemcongurationmodeandusethecommandremovetodeletethe
oldversionleintheFLASHmemory.IftheFLASHmemoryhassufcientspace,
changethenameoftheoldversionleandkeepitintheFLASHmemory.
zte(cfg)#configtffs
zte(cfg-tffs)#cdimg
zte(cfg-tffs)#removezImage
3-12
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential