Zte ZXR10 5250-28TC - Set Lacp Enable;Disable; Set Lacp Aggregator Port

Chapter4ServiceConguration
Syntax
settrunk<trunklist>pvid<1-4094>
ParameterDescription
ParameterDescription
<trunklist>Trunklist
<1-4094>DefaultVLANID,anynumberfrom1to4094
Example
ThefollowingexamplesetsthePVIDoftrunks1,2,3to1000:
zte(cfg)#settrunk1-3pvid1000
4.9.2setlacpenable/disable
Purpose
ThiscommandenablesordisablestheLinkAggregationControlProtocol.
CommandMode
Globalcongurationmode
Syntax
setlacp{enable|disable}
ParameterDescription
ParameterDescription
enableEnablestheLACP .
disableDisablestheLACP.
Default
TheLACPisdisabled.
4.9.3setlacpaggregatorport
Purpose
Thiscommandadds/deletesthedesiredportsto/fromthespeciedLACPaggregator.
CommandMode
Globalcongurationmode
4-123
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential