Zte ZXR10 5250-28TC - Show Qos Priority-Mapping Qos-Profile

ZXR105250SeriesCommandReference
CommandMode
Allcongurationmodes
Syntax
showqospriority-mappingport[<1-28>]
ParameterDescription
ParameterDescription
<1-28>
Portnumber.Differentdeviceshavedifferentportnumberranges.
Inthesyntax,the5250-28TCdeviceisusedasanexample.
Guidelines
Thecommandwithoutaportnumbershowsallports’congurations.Itshowsthe
informationaboutdefault-up,remappingDSCP ,remarkDSCP/UP ,port-to-prole,and
trustmode.
Example
Thefollowingexampleshowstheprioritymappingcongurationsofallports:
zte(cfg)#showqospriority-mappingport
PortPriorityMappingTable:
Flags:DefaultUP-PortDefaultUserPriority,PortProfile-PortQosProfile
RemarkUP-Enable/DisableRemarkPacketUPinaccordancewithQosProfile
RemarkDSCP-Enable/DisableRemarkPacketDSCPinaccordancewithQosProfile
RemapDSCP-Enable/DisableRemapDSCPinaccordancewithDSCP-to-DSCPTable
TrustMode-PortTrustMode
PORTDefaultUPRemarkDSCPRemarkUPRemapDSCPPortProfileTrustMode
-------------------------------------------------------------------------------
port-1UP-0DisableDisableDisable0TRUST-UP
port-2UP-0DisableDisableDisable0TRUST-UP
port-3UP-0DisableDisableDisable0TRUST-UP
……/*Omitted*/……
4.14.32showqospriority-mappingqos-profile
Purpose
Thiscommandshowsthepriority-mappingcongurationbasedonqos-prole.
CommandMode
Allcongurationmodes
4-326
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential