Zte ZXR10 5250-28TC - Show Dhcp Option82 Device; Set Dhcp Client Enable;Disable

ZXR105250SeriesCommandReference
Remote-ID:EnabledFormat:Manual
Value:123456789012345678901234567890123456789012345678901234567890123456789
01234567890123456789012345678901234567890123456789012345678
Subscriber-ID:Disabled
Reserve:Disabled
Option82mode:Default
Port1/2:
DHCPoption82isdisabledonport1/2.
4.25.20showdhcpoption82device
Purpose
Thiscommandshowsdeviceinformation,includingANIandremote-ID.
CommandMode
Allcongurationmodes
Syntax
showdhcpoption82device
Example
Thefollowingexampleshowsthecurrentdeviceinformation:
zte(cfg)#showdhcpoption82device
DHCPoption82sub-optioninformationondevice:
Access-Node-Identifier:-
Remote-ID:Cisco
4.25.21setdhcpclientenable/disable
Purpose
ThiscommandenablesordisablestheDHCPclientfunction.
CommandMode
Globalcongurationmode
4-444
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential