Zte ZXR10 5250-28TC - Set Loopdetect Port Protect

Chapter4ServiceConguration
Syntax
setloopdetectport<portlist>vlan<vlanlist>{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
<vlanlist>VLANlist.
enable
Enablesloopdetectionofthespeciedportsinthespecied
VLANs.
disable
Disablesloopdetectionofthespeciedportsinthespecied
VLANs.
Guidelines
Thesetloopdetectportvlanwiththeenableparameterisusedtoenableloopdetectionofthe
speciedportsinthespeciedVLANs.EachportcancongureuptoeightVLANs(except
PVID).IfthedetectiononVLANsisenabledbutthedetectiononPVIDisnotenabled,
thiscommandcanenablethedetectiononPVIDatthesametime.Iftheuser-congured
VLANIDisthesameasPVID,thisoperationisignored.Thesetloopdetectportvlan
commandwiththedisableparameterisusedtodisableloopdetectionofthespecied
portsinthespeciedVLANs.Notethatonlythedetectionontheuser-denedVLANIDs
canbedisabled.DetectiononPVIDcannotbedisabled.
4.35.5setloopdetectportprotect
Purpose
Thiscommandenablesordisablesportprotectionwhenthereisalooponaport.
CommandMode
Globalcongurationmode
Syntax
setloopdetectport<portlist>protect{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableWhenaloopisdetectedonaport,blockthisport.
disable
Whenaloopisdetectedonaport,activateanalarmbutnotblock
thisport.
4-527
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential