Zte ZXR10 5250-52TC - Layer 2 Protocol Transparent Transmission Configuration

ZXR105250SeriesCongurationGuide
lCongurationVerication
zte(cfg)#showvlanpvlan
pvlansession:1
promis-ports:16
promis-trunks:
isolate-ports:1-3
isolate-trunks:
community-ports:
community-trunks:
pvlansession:2
promis-ports:
promis-trunks:1
isolate-ports:4-6
isolate-trunks:
community-ports:
community-trunks:
5.14Layer2ProtocolTransparentTransmission
Conguration
Layer2ProtocolTransparentTransmissionOverview
IEEE802.1xisaPort-BasedNetworkAccessControlprotocol.Port-basednetwork
accesscontrolisawaytoauthenticateandauthorizetheuserstobeconnectedto
theLANequipment.Thistypeofauthenticationprovidesapoint-to-pintsubscriber
identicationmethodintheLAN.
TheZXR105250provides802.1xtransparenttransmissionfunctionwhichtransparently
transmits802.1xprotocolpacketsfromtheclienttotheauthenticationserverfor
authentication.
TheZXR105250provides802.1xtransparenttransmissionfunction.Italsoprovides
layer-2transparenttransmissionfunctionsuchasSTP ,LACP/OAM,ZGMP ,LLDPand
GVRP .Theprotocolrangeis0x00,0x02-0x2f.
Thecommonlayer-2protocolsareshownbelow.
ProtocolNumberProtocol
0x00STP
0x02LACP/OAM
0x03802.1x
0x09ZGMP
0x0ELLDP
5-62
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential