Zte ZXR10 5250-52TC - Figure 5-35 VBAS Configuration Instance Topology

Chapter5ServiceConguration
CommandFunction
zte(cfg)#setvbascascade-port<portlist>{enable|disable}Enablesordisablesthecascade
portVBASfunction.
zte(cfg)#setvbas{enable|disable}Enablesordisablestheglobal
VBASfunction.
showvbas(allcongurationmodes)DisplaystheVBASconguration.
VBASCongurationInstance
lCongurationDescription
SeeFigure5-35,thisexampledescribeshowtosettrustportofswitchAasport1,
cascadeportasport2,trustportofswitchBasport1.
Figure5-35VBASCongurationInstanceTopology
lCongurationProcedure
1.CongurationofswitchA:
zte(cfg)#setvbasenable
zte(cfg)#setvbastrust-port1enable
zte(cfg)#setvbascascade-port2enable
2.CongurationofswitchB:
zte(cfg)#setvbasenable
zte(cfg)#setvbastrust-port1enable
3.CongurationVerication
CheckswitchA
zte(cfg)#showvbas
vbas:enabled
trustport:1
cascadeport:2
CheckswitchB
zte(cfg)#showvbas
vbas:enabled
trustport:1
5-105
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential