Zte ZXR10 5250-52TC - Page 159

Chapter5ServiceConguration
StepCommandFunction
1ZXR10(config)#setzesrctrl-vlan<1-4094>
protect-instance<1-16>
CreateaZESRdomain.
ThecontrolVLANofaZESRdomain
cannotbeaserviceVLAN.Itcannot
haveanyconictwithaserviceVLAN
oraNetworkManagementVLAN.The
PVIDofaportcannotbeusedasthe
controlVLAN.
ZXR10(config)#setzesrctrl-vlan<cvlan
id>major-levelrole{master|transit|
zess-master|zess-transit}{primary-port<port1>|
primary-trunk<trunkId>}{secondary-port
<port2>|secondary-trunk<trunkId>}
Conguresanodeasthenodeonthe
primaryring.
ZXR10(config)#setzesrctrl-vlan<1-4094>
level<1-2>seg<1-10>role{master|
transit}{primary-port<port1>|primary-trunk
<trunkId>}{secondary-port<port2>|
secondary-trunk<trunkId>}
Conguresanodeasthemasternode
oratransitnodeonasecondaryring.
2
ZXR10(config)#setzesrctrl-vlan<1-4094>
level<1-2>seg<1-10>role{edge-assistant|
edge-control}{edge-port<port>|edge-trunk
<trunkId>}
Conguresanodeasanedgeassistant
nodeoranedgecontrolnodeona
secondaryring.
ZXR10(config)#setzesrctrl-vlan<1-4094>
major-levelpreforward<10-600>[preup<
0-500>]
Conguresthepreforwardtimeandthe
preuptimeforanodeontheprimary
ring.
Thedefaultvalueforthepreforwardtime
is10seconds,andthedefaultvaluefor
thepreuptimeis0second.
Thecongurationofthepreforwardtime
andthepreuptimeisrequiredtosatisfy
thefollowingcondition:preforward>
preup+linkrecoverytime(10seconds).
3
ZXR10(config)#setzesrctrl-vlan<1-4094>level
<1-2>seg<1-10>preforward<10-600>[preup
<0-500>]
Conguresthepreforwardtimeandthe
preuptimeforanodeonasecondary
ring.
lThepreforwardtime:takeseffect
duringlinkfailurerecovery.During
thefailurerecovery,thefaultyport
stillremainsblockedforsome
timeforthemasternodetoblock
thesecondaryportrsttoavoid
temporaryloops.
5-111
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential