Zte ZXR10 5250-52TC - Common Command Parameters; Table 3-2 Common Command Parameters

Chapter3UsageandOperation
InMac-Based-Vlancongurationmode,youcanaddordeleterulesforaspeciedsession.
ToreturntoglobalcongurationmodefromMac-Based-Vlancongurationmode,runthe
exitcommandorpressCtr+Z.
User-DenedIngressACLCongurationMode
Inglobalcongurationmode,youcanruntheconfigingress-acluser-definenumber<801-
828>commandtoenteruser-denedingressACLcongurationmode,whichisshownas
follows:
zte(cfg)#configingress-acluser-definenumber811
zte(ingress-user-define-acl)#
Inuser-denedingressACLcongurationmode,youcanadd,delete,ormovetherules
ofACLswiththespeciedACLnumbers.
Toreturntoglobalcongurationmodefromuser-denedingressACLcongurationmode,
runtheexitcommandorpressCtr+Z.
3.3CommonCommandParameters
ForcommoncommandparametersoftheZXR105250,refertoTable3-2.
Table3-2CommonCommandParameters
ParameterDescription
<portlist>Portnumber,portnameorportnumberrangeseparatedbya
comma,forexample:
l1,2,4-8,18
lp1,pp2,4-8,port18
Thep1,pp2,andport18areportnamescreatedbyusers.
SlotIDisaddedbeforetheportIDofthedevicessupporting
subcards.Forexample,fortheZXR105250-28SMand
5250-52PMdevices,theportlistisasfollows:
l1/1,1/2,1/4-8,1/18
l2/1,2/2
<vlanlist>VLANID,VLANnameorVLANrangeseparatedbyacomma,
forexample:
l1-19,77,88,100-900
lvlan1,v1,10,100-200
<trunklist>TrunkIDortrunkrangeseparatedbyacomma,forexample,
1-5,7,10.
<portname>Oneportnumberorportnamecanbeenteredonce.
<vlanname>OneVLANIDorVLANnamecanbeenteredonce.
<trunkid>OnetrunkIDcanbeenteredonce.
3-11
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential