Zte ZXR10 5250-52TC - Show Poe Config

Chapter4ServiceConguration
CommandMode
Globalcongurationmode
Syntax
showpoestatus[port<portlist>]
ParameterDescription
ParameterDescription
<portlist>
Portlist.Thecommandwithouttheportlistparametershows
POEstatusofallports.
Example
ThefollowingexampleshowsthePOEstatusofports1and2:
zte(cfg)#showpoestatusport1/1-2
port:1/1
powerup:off
powerdevice:searching
powerdevicetype:notpowerdevice
802.3afclassification:unknown
current-power:0watt
avgerage-power:0watt
peak-power:0watt
port:1/2
powerup:off
powerdevice:disabled
powerdevicetype:open(noload)
802.3afclassification:unknown
current-power:0watt
avgerage-power:0watt
peak-power:0watt
4.3.10showpoeconfig
Purpose
ThiscommandshowspoweroverEthernet(POE)congurationsofports.
CommandMode
Globalcongurationmode
Syntax
showpoeconfig[port<portlist>]
4-69
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential