Zte ZXR10 5250-52TC - Set Loopdetect Port; Set Loopdetect Port Vlan

ZXR105250SeriesCommandReference
Guidelines
Allportsshareablockdelay.
Default
Thedefaultperiodthatloopdetectblockstheloopportis5minutes.
4.35.3setloopdetectport
Purpose
Thiscommandenablesordisablesloopdetectiononthespeciedports.
CommandMode
Globalcongurationmode
Syntax
setloopdetectport<portlist>{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableEnablesPVIDloopdetectiononthespeciedports.
disableDisablesloopdetectiononallVLANsforthespeciedports.
Guidelines
Thesetloopdetectportcommandwithenableisusedtoenableloopdetectiononports,
thatis,detectwhetherthereisalooponthePVIDfortheports.Thesetloopdetectpor
tcommandwithdisableisusedtodisableloopdetectiononports,thatis,disableloop
detectiononallVLANsfortheports.
4.35.4setloopdetectportvlan
Purpose
Thiscommandenablesordisablesloopdetectionofthespeciedportsinthespecied
VLANs.
CommandMode
Globalcongurationmode
4-526
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential