Zte ZXR10 5250 Series - Page 191

Chapter5ServiceConguration
CommandFunction
zte(cfg)#setdhcprelayoption82modeport<portlist>{default|
drop|modify|append}
Setsthemodeinbindingthe
dynamicuserinformationbinding
tableoptionsfortheport.
zte(cfg)#setdhcprelayservermode{ipport|vclass-id}
SetstheDHCPRelaymode,sets
theDHCPserverdependingon
ipportorvclass-id.
zte(cfg)#setdhcprelayserverretry<5-1000>
SetstheDHCPRelayretry,thatis,
thenumberoftimesthatmessage
resendingtotheserveristried.
zte(cfg)#setdhcprelayvclass-id{characters<string>|
hex-numbers<hex-string>}server<A.B.C.D>
SetstheserverIPaddress
correspondingtotheclass-id
domainoftheserver.
zte(cfg)#cleardhcprelayvclass-id{characters<string>{server
A.B.C.D}|hex-numbers<hex-string>{serverA.B.C.D}}
Clearsthecongureddhcprelay
vclass-id.
zte(cfg)#cleardhcprelayoption82deviceaniClearsthedeviceIDinformation.
showdhcprelay
DisplaystheDHCPrelay
conguration.
showdhcpvclass-id
DisplaystheDHCPRelayoption60
conguration.
zte(cfg)#cleardhcpoption82sub-optiondeviceaniClearsthedeviceIDinformation.
showdhcprelaybinding[port<1-28>|trunk<1-15>](all
congurationmodes)
DisplaystheDHCPrelaybinding
information.
showdhcprelayoption82port<1-28>(allcongurationmodes)
DisplaystheDHCPrelayoption82
congurationoftheport.
showdhcprelayoption82device(allcongurationmodes)
Displaysdevice-related
information,includingANI
andremote-ID.
zte(cfg-router)#setipport<0-63>dhcprelay{agent|server
<A.B.C.D>}
SetstheDHCPrelayinformation
ofipport.
zte(cfg-router)#clearipport<0-63>dhcprelay{agent|server
<A.B.C.D>}
ClearstheDHCPrelayinformation
ofipport.
zte(cfg-router)#setdhcprelayserver<A.B.C.D>SetsaglobalDHCPserver.
zte(cfg-router)#setdhcprelayglobal-ipport<0-63>
SetsaglobalipportforaDHCP
relay.
5-143
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential