Zte ZXR10 5250 Series - Figure 6-47 Telnet Login Instance

ZXR105250SeriesCongurationGuide
CommandFunction
zte(cfg)#telnet<destip-addr>destination-port<port-num><src
ip-addr>
Setstheportnumberandsource
IPaddresswhenthedeviceis
usedasaTelnetclienttologinto
anotherdevice.
zte(cfg)#settelnetlisten-port<port>
Setsthelisteningportnumber
whenthedeviceisloggedinto
throughTelnet.Thevalueis23or
between1025and49151.
showTelnet(forallcongurationmodes)
DisplaystheTelnetconguration
andstatus.
TelnetCongurationInstance
lCongurationDescription
SeeFigure6-47,aswitchhasalayer-3portwiththeIPaddress192.168.1.1/24,and
theIPaddressofthePCis192.168.1.100/24.ThePCremotelylogsintotheswitch
throughTelnet.
Figure6-47TelnetLoginInstance
lCongurationProcedure
1.Conguretheswitch
Bydefault,theT elnetserverfunctionisenabled.Youcanusethefollowing
commandtomakesurethatthefunctionisenabled.
zte(cfg)#showTelnet
Telnetserverisenable
Telnetserverislisteningonport23
2.CongurethePC
6-52
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential